Testing Description
This is a one-of-a-kind, custom-built excavator that was completely rebuilt and finished in 2023. It’s the only machine of its kind in North America and took two years to assemble. The machine operates as new, with no emissions or DEF-sensor issues.
The excavator is available for purchase with one bucket for $400,000. Alternatively, it can be purchased with a new 2021 Hydraram sheet pile driver (valued at over $200,000) for $500,000. This driver can handle sheet piles, H piles, and more.
The machine features a custom 60-foot reach 3-piece boom, perfect for sheet pile driving, large demolition processors, grapples, buckets, and large dual drum grinders. It’s in mint condition with low hours of operation and a new Komatsu custom 60-foot extreme duty 3-section boom. The boom alone is worth over $300,000, including installation costs.
This excavator can drive 40-50-60 foot sheets pile, replacing large crane-mounted units with PowerPak hydraulic units. It reduces your crew from 4 or 5 to just 2 and can drive four times as many sheets per hour. It’s ready to drive piles half an hour after arriving on-site, unlike cranes which can take a day. It can also work in tight locations and swampy ground using wood pads if required.
The machine can then be used for all excavator work required on the job, and can remove the sheet piles when the excavation is done. No second machine is required. This machine was assembled for a large job in swampy ground for building a bridge with 40 foundations that were 30 feet wide x 50 long and needed to be excavated to a depth of 20 feet. However, due to COVID, that job was put on hold.
The machine comes with a custom modified new factory all Komatsu 3-piece boom, all-new custom hydraulic steel lines, valves for 3 hydraulic functions plus case drain, a new high-end professionally installed German auto greaser system, and a Geith hydraulic pin grabber coupler. It also has a hydraulic removable Komatsu demolition counterweight (a $50,000 factory option) plus $35,000 in additional custom rear top-mounted weights.
The machine can be moved complete on an 8 or 9 axle low bed at a height of 14 feet on the bed. It has 0 working hours on new factory Komatsu hydraulic pumps installed. The complete hydraulic system, including the main valve body, was rebuilt to install the additional hydraulic valves and set up to run the new Hydraram sheet pile driver or any demolition attachments, at a cost of over $75,000.
NAHANNI TRUCK AND TRAILER BLASTED THE UNDERCARRIAGE AND ALL GUARDING WAS REMOVED AND BLASTED AND MAIN BODY WAS HAND SANDED THEN COMPLETELY PAINTED WITH QUALITY EPOXY PAINT AND NEW KOMATSU DECALS INSTALLED ON THE MACHINE
THE FOLLOWING EQUIPMENT IS AVAILAVAILABLE AND READY TO WORK ON THIS MACHINE: (Copy and Paste Ad Urls)
a) NEW $220,000.00 2021 HYDRARAM 175 HYD HP SHEET PILE DRIVER 45-65 TON CLASS TAKE FOR $100,000.00 (with machine only)
https://www.kijiji.ca/v-view-details.html?adId=1631390586
b) LOW HOUR $125,000.00 TEREX WS-120MD 160 HYD HP DUAL DRUM GRINDER 30-50 TON EXCAVATOR TAKE FOR $40,000.00
https://www.kijiji.ca/v-view-details.html?adId=1539702132
c) NEW $85,000.00 KINSHOFFER LOG LOADER – 3 3 YARD DEMOLITION 360 DEGREE ROTATION 20K CAPACITY GRAPPLE TAKE FOR $40,000.00
https://www.kijiji.ca/v-view-details.html?adId=1630113607&siteLocale=en_CA
d) OKADA FACTORY REBUILT 0 HOUR 2020 $110,000.00 HYDRAULIC HAMMER/BREAKER C/W TWO NEW MOIL POINTS TAKE FOR $60,000.00
https://www.kijiji.ca/v-view-details.html?adId=1632550369
e) 3 X HENSLEY HPX 400-490 KOMATSU 30-46-70 IN HD BUCKETS ALL AS NEW OR NEW – TAKE ALL THREE FOR $25,000.00
https://www.kijiji.ca/v-view-details.html?adId=1632754851
f) NEW 2023 PRIMARY DEMOLITION PROCESSOR & 2023 DEMOLITION SORTING GRAPPLE – TAKE BOTH WITH MACHINE $50,000
https://www.kijiji.ca/v-view-details.html?adId=1633069312
g) AS NEW $80,000.00 OKADA CUT 80FR STEEL – CONCRETE DEMOLITION SHEAR – TAKE FOR $35,000.00
https://www.kijiji.ca/v-view-details.html?adId=1527158230
h) ESCO 400 – 450CLASS HEAVY DUTY 24 INCH BUCKET C/W EXTREME DUTY RIPPER SHANK HOLDER – FOR RIPPING HARD GROUND AND CLEANING BETWEEN PILES IN FOUNDATION TAKE IT FOR $6000.00
ALL OF WHICH ARE AVAILABLE FOR THIS MACHINE TO WORK NOW – SEE MY OTHER ADS.
MACHINE COST TO REPLACE WELL OVER 1.3 MILLION AND WITH TODAY’S ISSUES MORE THAN 6 – 12 MONTHS OF PARTS AND WORK. TO BUILD
NOTE: THE APPRAISAL OF THE MACHINE SHOWN WAS DONE BEFORE MACHINE WAS FINISHED AND BEFORE I SPENT ANOTHER $300,000.00 PLUS ON COMPLETION – MACHINE IS CLEAR TITLE – READY TO WORK – NEEDS NOTHING
SEE COMPLETE DETAILS AND 130 PICTURES OF THIS MACHINE HERE: (CLICK or copy and paste web link)
https://www.mediafire.com/folder/5j7f20t4zrld4/K%20OMATSU-PC450LC-8
Excavator Details
This unique excavator is a game-changer, designed to handle a range of tasks with precision.
A comprehensive rebuild was executed, sparing no expense, resulting in a fully enhanced machine finished in 2023.
Note: Replacement Cost Well over $1,300,000 without the HydraRam Sheet Pile Driver or other attachments
Features:
Excavator Hours: 7,300 (Total Rebuild in 2023)
Custom All Komatsu 3-Piece Boom for Multiple Versatile Attachments
Enhanced for Sheet Pile Driving, Excavation, Demolition, and More
Comes with New 2021 175 Hydraulic HP HydraRam Sheet Pile Driver (Value: $250,000) for $500,000
Our Total Investment: Over $600,000 or $800,000 with HydraRam Sheet Pile Driver
As New Hensley 46-Inch Extreme-Duty Digging Bucket Included
Capabilities:
Excavating To 34-36 Feet Depth with Included 46 Inch 2.5 Yard Bucket – 70 Inch 4 Yard Bucket Available (Both are Hensley Extreme Duty)
Sheet Pile Driving
Large Hydraulic Hammers and Demolition Processors Hydraulic Grapples – Demolition (Vertical and Horizontal Reach: 60-70 Feet Depending on Attachment)
Large Dual Drum Grinder
Additional Equipment Available:
Kishoffer T40HPX – 114 Helix Drive Grapple with 20,000 lb 2.5 Yard Capacity (Value: $85,000)
Choice of Several Buckets
Okada Cut82 Rotating Demolition Shear
2020 – 0 Hours Since Factory Rebuilt Okada Model: ORV7500 7500 ft lb hammer Serial Number: 363B538 Dimensions: 124″ L Operating Weight: 5,950 lbs
…and much more!
Why Choose This Excavator:
Handles Various Attachments with Ease
Custom 3-Piece Boom for Precise Operations
Rebuilt and Enhanced for Exceptional Performance
Can Replace Cranes for Sheet Pile Work in Tight Locations
Versatile and Productive Addition to Any Fleet
Will Look At 35-40 Foot Newer Class A Diesel Pusher Motorhome Or A 1964 – 1971 Classic Muscle Car As Part Trade
Financing Available OAC
Contact Frank: 604-476-7777
Location: Langley BC
NOTE: The Appraisal Shown in image #6 does not take into account the cost of the New $150,000.00 Factory Komatsu Log Loader Boom c/w pins and cylinders or the $200,000.00 plus spent after this viewing to complete the machine to its current finished state.
Will take a Class A Newer Diesel Pusher Motorhome – Classic 64-71 Muscle Car as part trade.
Note: Due to health reasons from the smog in the Fraser Valley, after 53 years in the demolition and rock excavation business we’re retiring and relocating to NB, which is why we’re selling this exceptional piece of equipment.