This machine is in excellent condition with its original paint. It comes from a large fleet that was liquidated due to the owner’s death. The machine has been fully maintained by SMS through a regular scheduled maintenance program. It is located in Cambridge Narrows NB and will be ready to work immediately. It does not require any additional time or maintenance before it can be put to use.
THIS MACHINE HAS O HOURS ON COMPLETE SERVICE AND WAS GONE THROUGH TO MAKE IT PERFECT – READY TO WORK NOW
The machine being offered is a Komatsu PC308USLC Hydraulic Excavator. It is designed with a short tail swing profile, specifically for working in congested or confined areas. This reduces the risk of safety issues that conventional excavators might pose. It is perfect for projects on roadways, bridges, urban areas, or any location with limited space. The PC308USLC provides the expected performance and productivity of Komatsu equipment.
HAS THE FOLLOWING OPTION INSTALLED:
1) ISOGARD COMPUTER SWING LIMITER TO STOP MACHINE SWINGING INTO POWER LINES OR OTHER OBSTACLES
To help operators of cranes and excavators work safely next to power lines or other obstacles.
Model 610 for excavators can be programmed to limit in many combinations of angle and swing. The programming is done in a very simple 2-step procedure.
Includes
- Keyboard
- Inclinometer
- Swing detector
2) LIFTING VALVES – SO LEGALLY CAN BE USED AS A CRANE – BOOM AND STICK WILL NOT CREEP OR LOWER UPON HOSE FAILURES
Burst protection is to be fitted on all earthmoving equipment used as a crane, where the rated capacity exceeds 1 tonne. The burst protection is to be fitted to both the boom and dipper arm of the equipment. Burst protection is to comply with the performance requirements of ISO 8643: Earthmoving machinery – Hydraulic excavator and backhoe loader boom-lowering control device – Requirements and tests as per WorkSafe.
Copy and paste the Komatsu PC308USLC PDF feature sheet:
https://www.mediafire.com/file_premium/2epvsismwtfnxl1/KOMATSU-PC308USLC-FACTORY-BROCHURE.pdf/file
Some key features of the Komatsu PC308USLC include:
- Small occupied width: The machine occupies a width of 5325 mm (17’5″) or less, allowing it to work efficiently in confined areas. The tail swing protrudes only 1.5″ from the tracks.
- High stability: It offers exceptional lifting capacity and stability, thanks to its large counterweight that requires no additional clearance.
- Larger cab: The Komatsu PC308USLC has a spacious cab with a low-noise design and viscous cab mounting. The sliding convex door makes it easy to enter confined areas and reduces the risk of damage when open on roadways.
Standard features of the machine include effortless joystick controls, a large seat, cup holder, sliding window, internal storage with a hot and cold box, and auto air conditioning.
Here are the specifications of the Komatsu PC308USLC:
- Manufacturer: Komatsu
- Model: PC308USLC-3
- Year: 2012
- Serial No.: KMTPC160E02030289
- SMS Stock Number: R33792
- Meter Reading: 10,715 hours
Additional details:
- Drivetrain: 3 speeds
- Track width shoes: 28 – 33.5 inches (700 – 850 mm)
- Track length: 16 ft. 3 in. (4,955 mm)
Engine specifications:
- Engine Type: 4-cycle, direct driven
- Engine Make: Komatsu
- Engine Model: SAA6D107E-1
- Fuel Type: Diesel
- Cylinders: 6
- Gross Horsepower: 200 hp (149 kW) @ 2,050 rpm
- Net Horsepower: 187 hp (140 kW) @ 2,050 rpm
- Cooling: Water-cooled
- Displacement: 408 cu. in. (6.69 l)
- Rated Speed: High: 2.9 mph (4.6 km/h), Mid: 2.1 mph (3.4 km/h), Low: 1.8 mph (2.9 km/h)
Komatsu PC308USLC-3 Excavator
- CATEGORY: EXCAVATORS
- MANUFACTURER: KOMATSU
- MODEL: PC308USLC-3
Boom/Stick Excavator Option 1
Max Cutting Height | 33.3 ft (10 m) |
Max Digging Depth | 21.2 ft (6 m) |
Max Loading Height | 23.6 ft (7 m) |
Max Reach Along Ground | 34.3 ft (10 m) |
Max Vertical Wall Digging Depth | 19.5 ft (6 m) |
Shipping Length of Unit | 31.4 ft (9 m) |
Boom/Stick Excavator Option 2
Max Cutting Height | 33.3 ft (10 m) |
Max Digging Depth | 22.8 ft (7 m) |
Max Loading Height | 23.6 ft (7 m) |
Max Reach Along Ground | 34.3 ft (10 m) |
Max Vertical Wall Digging Depth | 19.5 ft (6 m) |
Shipping Length of Unit | 31.4 ft (9 m) |
Boom/Stick Excavator Option 3
Max Cutting Height | 35.2 ft (11 m) |
Max Digging Depth | 24.9 ft (7 m) |
Max Loading Height | 26.2 ft (8 m) |
Max Reach Along Ground | 36.7 ft (11 m) |
Max Vertical Wall Digging Depth | 22.7 ft (7 m) |
Shipping Length of Unit | 31.2 ft (9 m) |
Bucket
Maximum Bucket Capacity | 2.5 cu yds (2 m) |
Minimum Bucket Capacity | 0.9 cu yds (0 m) |
Reference Bucket Capacity | 1.6 cu yds (1 m) |
Dimensions
Ground Clearance | 1.7 ft (0 m) |
Height – Top of Cab | 10.3 ft (3 m) |
Length of Track on Ground | 13.3 ft (4 m) |
Removal Counterweight Clearance | 4 ft (1 m) |
Tail Swing Radius | 11.4 ft (3 m) |
Width to Outside of Tracks | 11.4 ft (3 m) |
Engine
Aspiration | Turbocharged and air to air aftercooled |
Displacement | 408 cu in (0 m) |
Engine Model | SAA6D107E-1 |
Gross Power | 200 hp (149 kw) |
Net Power | 187 hp (139 kw) |
Operating Specifications
Cooling System Fluid Capacity | 5.5 gal (19 l) |
Engine Oil Capacity | 6.1 gal (23 l) |
Fuel Capacity | 103 gal (390 l) |
Hydraulic System Fluid Capacity | 55.5 gal (208 l) |
Operating Weight | 71938 lbs (32,631 kg) |
Swing Drive Fluid Capacity | 2.2 gal (8 l) |
Swing Mechanism
Swing Speed | 9.5 rpm |
Undercarriage
Drawbar Pull | 59180 lbs (26,844 kg) |
Max Travel Speed | 2.9 mph (3 kph) |
Number of Carrier Rollers per Side | 2 |
Number of Shoes per Side | 48 |
Number of Track Rollers per Side | 8 |